FlyByWire A32NX (FS 2020)

Checklist

Items

  • CREATE FLIGHT PLAN
  • TO OPEN THE FLASH LIGHT
  • CTRL-ALT L
  • FLYPAD (DASHBOARD)
  • CLIQUEZ SUR LE BOUTON IMPORT SIMBRIEF DATA
  • FLYPAD (GROUND / FUEL)
  • CLIQUEZ SUR LE PETIT NUAGE À COTÉ DU BOUTON FLÉCHE
  • FLYPAD (GROUND / SERVICES)
  • CHOISIR PAX, BAGGAGE, GROUND POWER ET CATERING
  • PEDESTAL (optionnal)
  • WEATHER RADAR (SYS) & (PWS) OFF
  • IGNITION SELECTOR NORMAL
  • ENGINE MASTER 1 & 2 OFF
  • THROTTLE LEVERS IDLE
  • LANDING GEAR DOWN
  • PARKING BRAKE SET
  • OVERHEAD
  • EXTERIOR POWER ON
  • BATTERY 1 & 2 ON
  • INSTRUMENT PANEL (LIGHTS)
  • CPT PFD & ND BRT
  • CO-PI PFD & ND BRT
  • ECAM UPPER AND LOWER BRT
  • MCDU LEFT & RIGHT BRT
  • (COVID)-OVERHEAD
  • PACK 1 & 2 OFF
  • APU MASTER ON
  • APU START ON
  •   ("WAIT UNTIL AVAIL (ECAM APU)")
  • EXTERIOR POWER OFF
  • APU BLEED ON
  • PACK 1 & 2 ON (NO LIGHT)
  • OVERHEAD LEFT (BOTTOM TO TOP)
  • CREW SUPPLY OFF
  • GND CTL ON
  • IR1 & IR2 & IR3 NAV
  • OVERHEAD CENTER (BOTTOM TO TOP)
  • NAV & LOGO 1
  • STROBE AUTO
  • OVHD INTEG LIGHT BRT
  • DOME LIGHT BRT
  • ANN LT TEST
  • APU FIRE TEST
  • ECAM SYSTEM CHECK
  • HYD PRESS (CHECK HYDRAULIC LEVEL)
  • ENG PRESS (CHECK OIL LEVEL)
  • DOOR PRESS (OXYGEN LEVEL MUST BE GREEN)
  • DOING WALK AROUND CHECK
  • IMPORTING & INSERTING FLIGHT PLAN USING MCDU (FMC)
  • IMPORTING DATA INTO MCDU (SIMBRIEF)
  • INSERTING MCDU DATA
  • INSERTING MCDU INIT A
  • INSERTING MCDU F-PLN DEPARTURE (SIMBRIEF)
  • INSERTING MCDU F-PLN WAYPOINTS
  • INSERTING MCDU F-PLN AIRWAYS
  • INSERTING MCDU F-PLN ARRIVAL (SIMBRIEF) (BYPASS FOR ANY LONG TRIP)
  • INSERTING MCDU F-PLN VALIDATION
  • INSERTING MCDU SEC F-PLN COPY PRIMARY F-PLN NOT WORKING IN FBW
  • INSERTING MCDU RAD NAV
  • INSERTING MCDU INIT B (SIMBRIEF)
  • INSERTING MCDU PROG
  • INSERTING MCDU PERF
  • SEATBELTS ON
  • NO SMOKING AUTO
  • EMER EXIT LT ARM (1 clic)
  • FUEL PUMPS (6) ON
  • IN AVITAB, SEARCH FOR THE DEPARTURE AIRPORT ATIS FREQ
  • ATIS FREQ ON RADIO SET
  • BARO DEPARTURE SET
  • VHF1 BUTTON OFF (NO WHITE)
  • ALTITUDE SET
  • FCU MODE SELECT ARC
  • FCU ZOOM SELECT 20
  • TERR ON ND ON
  • TRANSPONDER MODE AUTO
  • ENTER SQUAT NUMBER 1577
  • TCAS ABV
  • BEACON ON
  • FLYPAD (GROUND)
  • FERMER LES PAX, BAGGAGE, EXT. POWER ET CATERING
  • CHECK THAT ALL DOORS ARE CLOSE
  • BETTER PUSHBACK
  • PRE-PLAN EXECUTE
  • PUSHBACK START
  • ENGINE START
  • ENGINE MODE START
  • ENGINE 1 START
  • CHRONO START
  •   ("WAIT UNTIL ENGINE 1 N1 AVAILABLE ")
  • CHRONO STOP
  • ENGINE 2 START
  • CHRONO START
  •   ("WAIT UNTIL ENGINE 2 N1 AVAILABLE ")
  • CHRONO STOP
  • ENGINE MODE NORM
  • GROUND SPOILER ARM
  • RUD TRIM RESET
  • FLAPS SET FOR TAKOFF
  • TRIM SET FOR TAKOFF
  • APU BLEED OFF
  • APU MASTER OFF
  • RUNWAY TURN ON
  • NOSE LIGHT TAXI
  • WING ON
  • TAXING RUNWAY 20 KNOTS
  • ECAM F/CTL MENU
  • FLIGHT CONTROL CHECK
  • RADAR ON
  • WINDSHIELD ON
  • TCAS TA/RA
  • AUTO BRAKE MAX
  • CALL FWD (OVERHEAD) PUSH (CLEAR CONFIGURATION STATUS ECAM)
  • TEST T.O CONFIG PUSH
  • LAND ON
  • NOSE T.O.
  • PARKING BRAKE SET
  • CHRONO START
  • THROTTLE N1 50%
  • PARKING BRAKE RELEASE
  • THROTTLE N1 FLEX/TOGA
  • JOYSTICK DOWN UNTIL 80KTS; NEUTRAL AT 100KTS
  • VR - POSITIVE RATE
  • LANDING GEAR UP
  • GROUND SPOILER DISARMED
  • FOLLOW FLIGHT DIRECTOR
  • PFD "LVR CLB" THROTTLE LEVERS CLB
  • -F FLAPS UP
  • -S FLAPS RETRACT
  • FCU AP1 ON ONLY WHEN THR ON CLB
  • ECAM CRUISE (TAT) -> 10°C (CLOUDY) ENG ICE ON
  • RUNWAY TURN OFF
  • NOSE LIGHT OFF
  • GENERAL RULES (PASSING 10000 FT)
  • LAND OFF (1 clic)
  • SEATBELTS OFF
  • QNH FLASHING (PASSING TRANSITION ALT)
  • BARO PULL TO STD (flèche vers la bas)
  • CRUISING
  • TCAS N
  • FIND THE ALTITUDE ILS POINT (WAYPOINT) & DETERMINE T.O.D
  • CLICK TWICE F-PLN
  • CLICK MDCU L1 BUTTON
  • CLICK MDCU FIX INFO
  • TYPE THE REFERENCE WAYPOINT AND CLICK L1
  • TYPE RADIUS AGAINST CALCULATOR FLYPAD (TOD)
  • 60 NM before T/D
  • CRUISE PAGE PROG
  • IN AVITAB, SEARCH FOR THE ARRIVAL AIRPORT ATIS FREQ
  • IF ATIS NOT AVAILABLE, USE AVITAB WEATHER DATA
  • CHECK & REVIEW APPROACH CHARTS
  • INSERTING MCDU (APPR PAGE) PERF
  • ALTITUDE ARRIVAL SET
  • AT 5 NM FROM THE DESCENT POINT
  • ALTITUDE BUTTON PUSH (Flèche vers le haut)
  • TCAS BLW
  • GENERAL RULES (PASSING 10000 FT)
  • LAND ON (3 clic)
  • SEATBELTS ON
  • AUTO/BRAKE LOW or MED
  • FCU "LS" ON (AS REQUIRED)
  • STD FLASHING (PASSING TRANSITION ALT)
  • BARO PUSH TO SET (flèche vers le haut)
  • IF ATIS NOT AVAILABLE, USE AVITAB WEATHER DATA
  • BARO ARRIVAL SET
  • AFTER DECEL WAYPOINT
  • GROUND SPOILER SET (IF FASTER THAN 230 KNOTS)
  • GREEN DOT (PFD)
  • FLAPS 1
  • RUNWAY IN LINE
  • FCU APPR ON
  • FCU AP2 ON
  • S-SPEED (PFD)
  • FLAPS 2
  • LANDING GEAR DOWN
  • GROUND SPOILER ARMED
  • NOSE LIGHT T.O
  • F-SPEED (PFD)
  • FLAPS 3
  • FLAPS FULL
  • PASSING 400 FEET
  • AUTOPILOT DISCONNECT
  • "RETARD RETARD"
  • THROTTLE LEVERS IDLE
  • REVERSE FULL
  • BRAKES AS REQUIRED
  • "AT 70 KTS"
  • REVERSE IDLE
  • WEATHER RADAR (SYS) & (PWS) OFF
  • GROUND SPOILER DISARMED
  • FLAPS UP
  • TCAS N
  • LAND OFF
  • APU MASTER ON
  •   ("WAIT UNTIL FLAPS OPEN (ECAM APU)")
  • APU START ON
  • WHEEL VIEW (PARKING HELP)
  • Pass to outside view and type CTR SHIFT 4
  • PARKING BRAKE SET
  • APU BLEED ON
  • ENGINE 1 OFF
  • ENGINE 2 OFF
  • TCAS STBY
  • STROBE OFF
  • BEACON OFF
  • WING OFF
  • RUNWAY TURN OFF
  • NOSE LIGHT OFF
  • SEATBELTS OFF
  • FUEL PUMPS (6) OFF
  • IR1 & IR2 & IR3 OFF
  • FLYPAD (GROUND)
  • CHOISIR PAX, BAGGAGE, EXT. POWER ET CATERING
  • NAV & LOGO OFF
  • NO SMOKING OFF
  • EMER EXIT LT OFF
  • WHEN PASSENGER ARE GONES
  • APU BLEED OFF
  • APU MASTER OFF
  • APU START OFF
  • BATTERY 1 & 2 OFF